[Aug-2026] HPE2-T37 Certification with Actual Questions from DumpsKing
Updated HPE2-T37 Dumps PDF - HPE2-T37 Real Valid Brain Dumps With 117 Questions!
HP HPE2-T37 certification exam is a multiple-choice exam that tests your knowledge in various areas such as HPE OneView architecture, installation, configuration, and administration. HPE2-T37 exam consists of 60 questions, and you will have 90 minutes to complete it. To pass the exam, you need to score at least 70%. HPE2-T37 exam is available in English and Japanese languages.
HPE2-T37 exam is suitable for a range of IT professionals, including system administrators, network administrators, and storage administrators. It is recommended for those who are responsible for managing HPE infrastructure or who are planning to deploy HPE OneView in their organization. HPE2-T37 exam is also relevant for those who are seeking to advance their careers in the IT industry and gain recognition as an HPE certified professional.
NEW QUESTION # 20
Which component managed using HPE OneView can obtain an IP address from the subnet and address range defined in the HPE OneVlew settings?
- A. An iL0 in an HPE Synergy compute node
- B. A Rack Management Controller
- C. An iL0 in an HPE ProLiant server
- D. Any supported HPE storage array
Answer: C
Explanation:
An iLO in an HPE ProLiant server can obtain an IP address from the subnet and address range defined in the HPE OneView settings. HPE OneView allows administrators to define IP address pools for various components, including iLO management addresses. When a server is added to HPE OneView, it can automatically assign an IP address to the iLO from the predefined range.
* Option A: Storage arrays typically have their IP configurations managed separately.
* Option B: Rack Management Controllers may not be configured using IP pools in HPE OneView.
* Option C: HPE Synergy compute nodes use a different method (the Frame Link Module) for management network configuration.
NEW QUESTION # 21
Which statement about the volume template is true?
- A. Users will be able to change sharing type and volume capacity
- B. A volume created using this template mil not support snapshots
- C. A volume created using this template will not support deduplication
- D. Users will be able to select storage pool during volume creation
Answer: D
NEW QUESTION # 22
Which platform is supported for HPE OneView appliance deployment?
- A. Citrix XenServer
- B. VMware Tanzu
- C. Microsoft Hyper-V
- D. Oracle VM Virtual Box
Answer: C
Explanation:
HPE OneView appliance deployment is supported on Microsoft Hyper-V. Customers can deploy the HPE OneView virtual appliance on Hyper-V hosts, allowing for seamless integration into Microsoft-based virtualization environments.
* Option B (Correct): Microsoft Hyper-V is a supported hypervisor for deploying HPE OneView.
* Option A: Citrix XenServer is not a supported platform for HPE OneView deployment.
* Option C: Oracle VM VirtualBox is not intended for production deployments of HPE OneView.
* Option D: VMware Tanzu is a Kubernetes platform and not suitable for deploying HPE OneView appliances.
NEW QUESTION # 23
Your customer plans to use HPE OneView to manage a small environment based on HPE ProLiant servers that includes G7 and Gen 10 systems.
What should you explain to thiscustomer?
- A. HPE Management Agent must he installed for HPE ProLiant Gen 10 servers.
- B. Not all of the features will be available for HPE ProLiant G7 systems.
- C. HPE ProLiant Gen 10 servers do not need an HPE OneView license.
- D. HPE ProLiant G7 and Gen10 cannot be managed using the same appliance.
Answer: B
Explanation:
Reference:
https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=emr_na-a00036908en_us
NEW QUESTION # 24
You originally configured boot mode for HPE ProLiant Gen10 server to 'Legacy BIOS' in an HPE OneView server profile and deployed an operating system. A few weeks later, you change the boot mode to the 'UEFI optimized' to leverage some features provided by this mode.
What must you do next?
- A. reset an il_0 management processor to activate the new boot mode for the server
- B. reinstall an operating system, as UEFI is using different drive format than Legacy BIOS
- C. reset BIOS settings to the defaults so UEFI settings can be applied
- D. reset BIOS settings to the defaults through the server profile after changing the boot mode
Answer: A
NEW QUESTION # 25
Refer to the exhibit.
Which statement about the logical interconnect shown is true?
- A. Additional uplink ports can be added to ETH-Uplink to increase available bandwidth.
- B. FC uplinks are not supported and will be converted to FCoE or RoCE uplinks.
- C. The maximum supported number of the internal networks for logical interconnect is configured.
- D. For FC uplink sets, an additional uplink from second module should be added for redundancy.
Answer: C
NEW QUESTION # 26
Why would you install an HPE OneView corticate to HPE BladeSystem Onboard Administrator?
- A. to enable automatic firmware management
- B. to enable licenses management
- C. to enable access to REST API features
- D. to enable single sign-on functionality
Answer: D
NEW QUESTION # 27
Which statement about managing an HPE BiaoeSystem sever is true?
- A. Both c3000 and C7000 HPE BladeSystems enclosures can be imported to HPE Oneview for monitoring
- B. An HPE server blade can be removed trom HPE OneView by deleting the server from the Server Hardware section
- C. A muiti-enclosure Vrtuai Connect domain can be imported to HPE OneView without disrupting servers
- D. An HPE server blade cannot be deleted from HPE OneView It must be physically removed from the enclosure
Answer: B
NEW QUESTION # 28
Refer to the exhibit.
Your customer created multiple networks in HPE OneView, but only Eth-1 is available to be used within a server profile.
What is a likely cause of this situation?
- A. The other networks have Private Network' selected, which hides them from ComputeModules.
- B. The other networks are configured with a purpose other than General or Management.
- C. The other networks are not added to the Logical Interconnect Group configuration.
- D. The other networks are not configured with the required Smart Link parameter.
Answer: C
NEW QUESTION # 29
For HPE Primera, match each task with the management tool that can be used to perform it.
Answer:
Explanation:
NEW QUESTION # 30
Which of the following actions from the HPE OneView interface is available for a volume provisioned on an external array?
- A. Shrinking a volume
- B. Growing a volume
- C. Volume conversion
- D. Remote replication
Answer: B
Explanation:
From the HPE OneView interface, you can grow a volume provisioned on an external array. This action allows administrators to increase the capacity of existing volumes to meet growing storage requirements without disrupting services. The ability to grow volumes is contingent on the support of the underlying storage system and available capacity.
NEW QUESTION # 31
You are designing a management solution for five HPE Synergy frames in a primary data center and two additional frames at aproduction site, which is 80m away. Your C......about the cost and complexity of the proposed solution.
What can be done to simplify management and deployment of the remote frames?
- A. Frames from the remote data center can be added to an existing Logical Enclosures using FLM links.
- B. Frames from the remote data center can be added as a remote management ring.
- C. HPE OneView from the primary data center can be replicated and used to manage remote frames.
- D. HPE OneView backup from the primary data center can be restored in the remote data center.
Answer: A
NEW QUESTION # 32
You want to put two FlexNlCs into a single Link Aggregation Group within a server profile. What Is a prerequisite for this setup?
- A. The Compute Module profile must have exactly two connections defined.
- B. An upgrade license must be purchased and deployed.
- C. Both FlexNlCs must be connected to the same network.
- D. The sFlow option must be enabled and configured.
Answer: D
NEW QUESTION # 33
Refer to the exhibit.
After adding SAN Manager to HPE OneView. you noticed that all SANs are in the discovered state. How will this affect HPE OneView storage management capabilities?
- A. Snapshot functionality will be limited only to the volumes not using these SANs.
- B. Volume presentation through server profile will work with the discovered state.
- C. Volume provisioning will only work for arrays that ate accessible through these SANs.
- D. Auto-zoning functionality will not work until SANs are associated with networks.
Answer: B
NEW QUESTION # 34
Match each type of HPE OneView network with its appropriate description.
Answer:
Explanation:
NEW QUESTION # 35
Which statement about logical enclosure scaling is true?
- A. The number of frames can be adjusted within enclosure group.
- B. Logical enclosure must be deleted and re-created using new frames.
- C. New LIG spanning across the new number of the frames must be defined.
- D. The number of frames can be changed within logical enclosure.
Answer: C
NEW QUESTION # 36
......
Pass Your HPE2-T37 Exam Easily With 100% Exam Passing Guarantee: https://dumpstorrent.dumpsking.com/HPE2-T37-testking-dumps.html
