2024 Easy Success Cisco 300-510 Exam in First Try
Best 300-510 Exam Dumps for the Preparation of Latest Exam Questions
Cisco 300-510 exam is designed for IT professionals who want to specialize in advanced routing solutions for service provider networks. Implementing Cisco Service Provider Advanced Routing Solutions certification exam validates the candidates' knowledge and skills in implementing and troubleshooting advanced routing technologies in service provider environments. 300-510 exam covers a wide range of topics, including BGP, MPLS, segment routing, and VPN technologies.
NEW QUESTION # 103
What are two characteristics of BGP confederations? (Choose two.)
- A. An Intra-Confederation EBGP session behaves like an EBGP session when propagating routing updates.
- B. The member AS numbers used within the confederation are visible from outside the confederation.
- C. Intra-Confederation EBGP neighbors must be directly connected or ebgp-multihop must be configured.
- D. All routers within the BGP confederation must support BGP confederations.
Answer: C,D
NEW QUESTION # 104
Refer to the exhibit.
Refer to the exhibit. An engineer is troubleshooting an issue with traffic steering using the color-only automated steering mechanism. BGP is failing to automatically steer traffic into an SR policy with the given color of a route, regardless of the next hop. The layer 2 configuration is correct, and the physical connection between the devices is working normally. Whch additional command sequence must the engineer add to correct the issue?
- A. Option D
- B. Option C
- C. Option A
- D. Option B
Answer: A
NEW QUESTION # 105
Refer to the exhibit.
A network operator is getting the route for 10.11.11 0/24 from two upstream providers on
#XR3. The network operator must configure #XR3 to force the 10.11.11.0/24 prefix to route via next hop of 10.0.0.9 as primary when available. Which of these can the operator use the routing policy language for, to enforce this traffic forwarding path?
- A. higher local preference on the prefix coming from 192.168.0.1
- B. weight of 100 on the prefix coming from 192.168.0.1
- C. weight of 0 on the prefix coming from 192.168.0.2
- D. lower local preference on the prefix coming from 192.168.0.2
Answer: A
NEW QUESTION # 106
Refer to the exhibit.
A network operator is working to filter routes from being advertised that are covered under an aggregate announcement. The receiving router of the aggregate announcement block is still getting some of the more specific routes plus the aggregate. Which configuration change ensures that only the aggregate is announced now and in the future if other networks are to be added?
- A. Configure the summary-only keyword on the aggregate command
- B. Set each specific route in the AGGRO policy to drop instead of suppress-route
- C. Filter the routes on the receiving router
- D. Set each specific route in the AGGRO policy to remove instead of suppress-route
Answer: A
NEW QUESTION # 107
Which command is used to enable BIDIR-PIM under global configuration mode for Cisco IOS XE Sofware?
- A. ipv4 pim bidir-enable
- B. ip pim bidir-enable
- C. ip multicast-routing
- D. ip pim bidir
Answer: B
Explanation:
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipmulti_pim/configuration/xe-3s/imc-pim-xe-3s- book/imc_basic_cfg.html
NEW QUESTION # 108
Refer to the exhibit.
Refer to the exhibit. A service provider has LDP and segment routing running in the network. Mobility traffic is carried through LDP and enterprise traffic is carried through segment routing. Which configuration must be implemented to connect the bank branch with the HUB site on routers?
- A. Configure segment-routing sr-prefer prefix-list on CR1 and CR2 routers for 10.20.20.10/24.
- B. Configure segment-routing Sr-prefer prefix-list on AG1 and AG2 router for 10.10.10.10/24.
- C. Enable segment-routing Mpls Sr-prefer on CR1 and CR2 routers for 10.0.0.0/8.
- D. Enable segment-routing Mpls Sr-prefer on AG1 and AG2 routers for 10.0.0.0/8.
Answer: A
NEW QUESTION # 109
Refer to the exhibit.
XR1 and XR2 are sending the prefix 10.11.11.0/24 to XR3. A configured policy on XR1 is incorrectly prepending AS path 11 11 12 12 onto this prefix. A network operator wants to add a policy onto XR3 that will not allow the falsely prepending prefix from being installed. Which policy configuration applied to the XR3 neighbor configuration for XR1 can accomplish this requirement without impact to other or future received routes?
- A. Option D
- B. Option C
- C. Option A
- D. Option B
Answer: A
NEW QUESTION # 110
Refer to the exhibits.
All links inside the network are configured at a default cost of one inside the fully converged OSPF domain. Given the configuration from XR1, which interface does traffic from XR1 that is destined to the loopback interface of XR6 select for the exiting interface?
- A. Interface GigabitEthernet 0/0. The tier breaker of the path cost being lower. The node index priority does not impact this selection process.
- B. Interface GigabitEthernet 0/1. The tie breaker of the node index priority is lower and trumps the path cost.
- C. Interface GigabitElhemet 0/0. The tie breaker of the node index priority is lower and trumps the path cost.
- D. Interface GigabitEthernet 0/1. The tie breaker of the path cost being lower. The node index priority does not impact this selection process.
Answer: C
NEW QUESTION # 111
Refer to the exhibit. An administrator is troubleshooting Internet access issues on a customer's network. After applying this ISIS configuration to R1, the administrator notices that it fails to redistribute the default route into IS-IS. After checking the connectivity between the ISIS router and the ISP router the engineer confirmed there is Layer 3 connectivity between them. Which action should be taken to correct the problem?
- A. Configure R1 as a Layer 1 router
- B. Associate the default route with a VRF
- C. Configure the default route under any routing protocol other than IS-IS
- D. Add the default-information originate command to the configuration
Answer: D
NEW QUESTION # 112
Refer to the exhibit.
Refer to the exhibit. Customers A and C are experiencing packet drops when connecting to the application server While troubleshooting the problem the network engineer confirms that the IS-lS Level- 1/2 adjacency is up between routers A B C. and D and both customers can communicate with the database server without packet loss Which action must the engineer take to resolve the issue?
- A. Leak the 172, 17.10/24 route in the IS-IS databases on routers A and C.
- B. Advertise a static default route to the router B IS-IS database.
- C. Leak the customer A and customer C subnets in the router A IS-IS database.
- D. Advertise the application server subnet in the router D IS-IS database
Answer: D
NEW QUESTION # 113
What is a requirement of PIM-SM?
- A. It must use an RP
- B. It requires Cisco Express Forwarding to be enabled.
- C. It requires OSPF to be configured on the network.
- D. It must be enabled on loopback interfaces only
Answer: A
NEW QUESTION # 114
Refer to the exhibit.
R2
Answer:
Explanation:
Solution:-
R1
Int loopback0
Ip ospf 10 area 0
Int loopback10
Ip ospf network point-to-point
Int loopback20
Ip ospf network point-to-point
Int loopback30
Ip ospf network point-to-point
Router ospf 10
Area 1 range 172.16.100.0 255.255.252.0
Copy run start
Verification: -
NEW QUESTION # 115
Refer to the exhibit.
An engineer is addressing an IS-IS design issue which is running within the topology. All links are running on FastEthernet, except the link between R5 and R4, which is Gigabit Ethernet. Which statement about the design is true?
- A. All links have equal cost if the default metric is used
- B. R1 prefer to use R5 as the next hop to reach R4
- C. R4 prefer to reach R5 using R1 as the next hop
- D. R5 prefers to use R4 as the next hop for all routes
Answer: A
NEW QUESTION # 116
Refer to the exhibit. R1 is expected to receive routes originating from AS 65516 and from any ASs that are directly attached to it. However, R1 is receiving routes only from AS 65516. Which action corrects the configuration?
- A. Change the regular expression in the AS-path permit filter to ^65516_[0-9]*$.
- B. Change the regular expression in the AS-path permit filter to _65516_.
- C. Add the regular expression ^$. in the AS-path filter to permit the traffic from R2.
- D. Change the regular expression in the AS-path permit filter to .*.
Answer: A
NEW QUESTION # 117
Refer to the exhibit.
Router 1 is connected to router 2 on interface TenGigE0/1. Which interface provides the alternate path to 172.16.200.9/32 when the link between router 1 and router 2 goes down?
- A. TenGigE0/2 interface provides the alternate path
- B. TenGigE0/1 interface provides the alternate path
- C. A primary path must be manually installed
- D. A backup path must be statically installed
Answer: A
NEW QUESTION # 118
What is the role of segment routing mapping server?
- A. It works with IGP instances to calculate the prefix-SIDs in the absence of a mapping policy.
- B. It advertises a local SID mapping policy to all the mapping clients.
- C. It reads and translates remotely received SIDs from other mapping servers to create SID mapping entries.
- D. It selects multiple mapping entries to create overlapping active mapping policies.
Answer: B
Explanation:
NEW QUESTION # 119
Refer to the exhibit.
Routers within the cluster are not receiving the desired prefixes. What must be done to fix the issue?
- A. No client-to-client must be disabled.
- B. No client-to-client reflection must be enabled.
- C. Clients in that cluster must have full mesh connectivity between iBGP peers.
- D. Clients in that cluster must have full mesh connectivity between eBGP peers.
Answer: C
NEW QUESTION # 120
Which command is used to enable BIDIR-PIM under global configuration mode for Cisco IOS XE Software?
- A. ip pim bidir ip
- B. multicast-routing
- C. ipv4 pim bidir-enable
- D. Ip pim bidlr-enable
Answer: D
NEW QUESTION # 121
Drag and drop the attributes for the BGP route selection on the left into the correct order on the right. Not all options are used.
Answer:
Explanation:
NEW QUESTION # 122
Refer to the exhibit. After you applied these configurations to routers R1 and R2, the two devices could not form a neighbor relationship.
Which reason for the problem is the most likely?
- A. The two routers have the same network ID.
- B. The two routers cannot authenticate with one another.
- C. The two routers have the same area ID.
- D. The two routers have different IS-types.
Answer: A
NEW QUESTION # 123
Refer to the exhibit.
Which effect of this configuration is true?
- A. It sets the keepalive timer to 30 milliseconds and the hold timer to 240 milliseconds
- B. It sets the hold timer to 30 milliseconds and the keepalive timer to 240 milliseconds
- C. It sets the hold timer to 30 seconds and the keepalive timer to 240 seconds
- D. It sets the keepalive timer to 30 seconds and the hold timer to 240 seconds.
Answer: D
NEW QUESTION # 124
Refer to the exhibit. A network operator is troubleshooting TE tunnels and discovers that the soft preemption is not working as desired.
Where should the soft preemption be applied to solve the issue?
- A. Under the interface Loopback0 necessary for this deployment type.
- B. under the tunnel-te1 interface on PE1
- C. on the tail-end device for tunnel-te1 192.168.0.7
- D. explicitly for tunnel-te 1 under the Cisco MPLS TE configuration mode after the timeout setting
Answer: B
NEW QUESTION # 125
......
The Cisco 300-510 exam consists of 60-70 questions that are structured in a multiple-choice format. The candidates are given 90 minutes to complete the exam, and the passing score is 825 out of 1000. 300-510 exam measures the candidates' ability to design, implement, and troubleshoot complex routing protocols, technologies, and solutions in a service provider network environment.
300-510 Study Material, Preparation Guide and PDF Download: https://dumpstorrent.dumpsking.com/300-510-testking-dumps.html
