H12-811_V1.0 Study Guide Brilliant H12-811_V1.0 Exam Dumps PDF
View H12-811_V1.0 Exam Question Dumps With Latest Demo
NEW QUESTION 278
Which of the following statements about IPv6 anycast addresses are correct?
- A. Back to provide services with more than functions
- B. Back to achieve service load sharing
- C. The packet whose destination address is the anycast address will be sent to the nearest network interface in the sense of routing
- D. The group anycast address and the single address address use the same address space
Answer: A,C,D
NEW QUESTION 279
As shown in the figure below, assuming that the MAC address table of SWA. is as follows, now host A.
sends a data frame with a destination MAC address of MAC-B. Which of the following statements is correct? ()
- A. SWA. Discard the data frame
- B. Forward this data frame from port G0/0/3
- C. Flood out this data frame
- D. Forward this data according to the G0/0/2 port
Answer: D
NEW QUESTION 280
As shown in the following figure, in the switching network, all switches are running the stp protocol. When the topology is stable, which of the following switches can be used to modify the BPDU sending cycle. Can it affect the SWD configuration BPDU sending cycle? () (Single-choice question)
- A. SWB
- B. SWA
- C. SWC
- D. SWD
Answer: B
NEW QUESTION 281
When a company's network management needs to plan the network, the data packets that allow PC1 to access PC2 go through the G0/0/0 port (G0/0/2 on the picture). The data packet that PC2 accesses to PC1 goes from port G0/0/4 (G0/0/0 in the picture). () (Single-choice question)
- A. 0.0.0.00.0.0.00
#11.0.12.6
#11.0.12.1
0 - B. 10.0.12.5255.255.255.25511.0.12.6
#10.0.12.1255.255.255.25511.0.12.1 - C. 0.0.0.0
#0.0.0.0
0
#11.0.12.2 - D. 10.0.12.5255.255.255.25511.0.12.210.
0.12.1255.255.255.25511.0.12.5
Answer: D
Explanation:
#11.0.12.5
0
NEW QUESTION 282
What command line views exist on the VRP operating platform? ()*
- A. System view
- B. Interface view
- C. User view
- D. Agreement view
Answer: A,B,C,D
NEW QUESTION 283
On Huawei switches, you can use the vlan batch command to create multiple VLANs in batches, simplifying the configuration process. ()
- A. True
- B. False
Answer: A
NEW QUESTION 284
How many more bytes are the packets using MPLS label double-layer nesting technology than the original IP packets ()
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 285
The following description of the Router ID of OSPF is incorrect ().*
- A. The Router ID in the same area must be the same, and the Router ID in different areas can be different
- B. The Router ID must be specified by manual configuration
- C. Router ID. Must be the IP address of an interface on the router
- D. The prerequisite for the normal operation of the OSPF protocol is that the router has a Router ID
Answer: A,B,C,D
NEW QUESTION 286
Which of the following statements about Python is incorrect?
- A. Python has a wealth of third-party libraries.
- B. Python can be used for automated operation and maintenance scripts, artificial intelligence data science and many other fields.
- C. Python has a clear grammatical structure, is simple and easy to learn, and runs efficiently.
- D. Python is a fully open source high-level programming language.
Answer: C
NEW QUESTION 287
The Backup port in RSTP can replace the failed root port.
- A. False
- B. True
Answer: A
NEW QUESTION 288
The network administrator hopes to be able to effectively use the P address of the 192.168.176.0/25 network segment. Now that the company's marketing department has 20 hosts, which of the following address segments is best allocated to the marketing department? ()
- A. 192.168.176.0/25
- B. 192.168.176.96/27
- C. 192.168.176.160/27
- D. 192.168.176.48/29
Answer: C
NEW QUESTION 289
The router running the 0SPF protocol can reach the FULL state after completing the LSDB. synchronization. ()
- A. True
- B. False
Answer: A
NEW QUESTION 290
The function of the 0SPF hel1o message is ()
- A. Neighbor discovery
- B. Maintain neighbor relations
- C. Synchronize the LSDB of the router
- D. Update LSA. Information
Answer: A,B
NEW QUESTION 291
About the above configuration command is correct ()
- A. Modify the permission level of the save command in the user view to 3
- B. Modify the permission level of the user view command to 3, and save the matching sinus
- C. Modify the limit level of the save command used by a user to 3
- D. Modify the user's authority level to 3. And save the configuration
Answer: A
NEW QUESTION 292
In order to realize the network layer function on the VLANIF interface, it is necessary to configure on the VIANIF interface?
- A. Subnet mask
- B. IP address
- C. MAC address
- D. IP prefix
Answer: A,B
NEW QUESTION 293
All ports on the root bridge exchange machine are designated ends ()
- A. True
- B. False
Answer: A
NEW QUESTION 294
When the lease period reaches what percentage does the DHCP client send the lease renewal message for the first time? ()
- A. 0
- B. 0.5
- C. 0.875
- D. 0.25
Answer: B
NEW QUESTION 295
......
Free H12-811_V1.0 Test Questions Real Practice Test Questions: https://dumpstorrent.dumpsking.com/H12-811_V1.0-testking-dumps.html
