Jul 27, 2023 Detailed New 350-401 Exam Questions for Concept Clearance
350-401 Exam Preparation Material with New 350-401 Dumps Questions.
NEW QUESTION # 187
Drag and drop the DHCP messages that are exchanged between a client and an AP into the order they are exchanged on the right.
Answer:
Explanation:
NEW QUESTION # 188
Refer to the exhibit.
The inside and outside interfaces in the NAT configuration of this device have been correctly identified. What is the effect of this configuration?
- A. dynamic NAT
- B. static NAT
- C. NAT64
- D. PAT
Answer: D
Explanation:
Explanation
The command "ip nat inside source list 1 interface gigabitethernet0/0 overload" translates all source addresses that pass access list 1, which means 172.16.1.0/24 subnet, into an address assigned to gigabitethernet0/0 interface. Overload keyword allows to map multiple IP addresses to a single registered IP address (many-toone) by using different ports so it is called Port Address Translation (PAT).
NEW QUESTION # 189
Refer to the exhibit.
Assuming that R is a CE router, which VRF is assigned to Gi0/0 on R1?
- A. Default VRF
- B. Management VRF
- C. VRF VPN_A
- D. VRF VPN_B
Answer: A
Explanation:
Explanation
There is nothing special with the configuration of Gi0/0 on R1. Only Gi0/0 interface on R2 is assigned to VRF VPN_A. The default VRF here is similar to the global routing table concept in Cisco IOS
NEW QUESTION # 190
Drag and drop the characteristics from the left onto the infrastructure deployment models on the right.
Answer:
Explanation:
NEW QUESTION # 191
An engineer measures the Wi-Fi coverage at a customer site. The RSSI values are recorded as follows:
Which two statements does the engineer use to explain these values to the customer? (Choose two)
- A. Location D has the strongest RF signal strength
- B. The RF signal strength at location B is 50% weaker than location A
- C. The signal strength at location C is too weak to support web surfing
- D. The signal strength at location B is 10 dB better than location C
- E. The RF signal strength at location C is 10 times stronger than location B
Answer: B,E
NEW QUESTION # 192
Which two GRE features are configured to prevent fragmentation? (Choose two.)
- A. TCP MSS
- B. MTU ignore
- C. PMTUD
- D. TCP window size
- E. DF bit Clear
- F. IP MTU
Answer: A,F
Explanation:
Explanation
NEW QUESTION # 193
Drag and drop the DHCP messages that are exchanged between a client and an AP into the order they are exchanged on the right.
Answer:
Explanation:
NEW QUESTION # 194
Drag and drop the Cisco SD-Access solution areas from the left onto the protocols they use on the right.
Answer:
Explanation:
NEW QUESTION # 195
How does EIGRP differ from OSPF?
- A. EIGRP uses more CPU and memory than OSPF
- B. EIGRP supports equal or unequal path cost, and OSPF supports only equal path cost.
- C. EIGRP has a full map of the topology, and OSPF only knows directly connected neighbors
- D. EIGRP is more prone to routing loops than OSPF
Answer: D
NEW QUESTION # 196
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
- A. Permit 10.0.0.0.0.0.0.1
- B. Permit 10.0.0.1.0.0.0.254
- C. Permit 10.0.0.0.255.255.255.254
- D. Permit 10.0.0.1.0.0.0.0
Answer: B
NEW QUESTION # 197
An engineer creates the configuration below. Drag and drop the authentication methods from the left into the order of priority on the right. Not all options are used.
Answer:
Explanation:
NEW QUESTION # 198 
Refer to the exhibit. A network engineer configures NAT on R1 and enters me show command to verity the configuration What toes the output confirm?
- A. A Telnet from 160.1.1 1 to 10.1.1.10 has been initiated.
- B. R1 is configured with NAT overload parameters
- C. The first pocket triggered NAT to add on entry to NAT table
- D. R1 to configured with PAT overload parameters
Answer: C
NEW QUESTION # 199
Drag and drop the characteristics from the left onto the switching mechanisms they describe on the right.
Answer:
Explanation:
NEW QUESTION # 200
Drag and drop the Cisco SD-Access solution areas from the left onto the protocols they use on the right.
Answer:
Explanation:
NEW QUESTION # 201
Drag and drop the characteristics from the left onto the routing protocols they describe on the right.
Answer:
Explanation:
NEW QUESTION # 202
Drag and drop the virtual components from the left onto their deceptions on the right.
Answer:
Explanation:
NEW QUESTION # 203
Refer to the exhibit.
An engineer must ensure that all traffic leaving AS 200 will choose Link 2 as an entry point. Assuming that all BGP neighbor relationships have been formed and that the attributes have not been changed on any of the routers, which configuration accomplish task?
- A. Option D
- B. Option A
- C. Option C
- D. Option B
Answer: B
Explanation:
Explanation
R3 advertises BGP updates to R1 with multiple AS 100 so R3 believes the path to reach AS 200 via R3 is farther than R2 so R3 will choose R2 to forward traffic to AS 200.
NEW QUESTION # 204 
Refer to the exhibit. What does the error message relay to the administrator who is trying to configure a Cisco IOS device?
- A. A NETCONF message with valid content based on the YANG data models was made, but the request failed.
- B. The NETCONF running datastore is currently locked.
- C. The device received a valid NETCONF request and serviced it without error.
- D. A NETCONF request was made for a data model that does not exist.
Answer: D
Explanation:
NEW QUESTION # 205
Which two security features are available when implementing NTP? (Choose two )
- A. broadcast association mode
- B. access list-based restriction scheme
- C. symmetric server passwords
- D. encrypted authentication mechanism
- E. dock offset authentication
Answer: B,D
Explanation:
Explanation
The time kept on a machine is a critical resource and it is strongly recommend that you use the security features of NTP to avoid the accidental or malicious setting of incorrect time. The two security features available are an access list-based restriction scheme and an encrypted authentication mechanism.
Reference: https://www.cisco.com/c/en/us/support/docs/availability/high-availability/19643-ntpm.html
NEW QUESTION # 206
Drag and drop the LISP components on the left to the correct description on the right
Answer:
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/iproute_lisp/configuration/xe-3s/irl-xe-3s-book/irloverview.h
NEW QUESTION # 207
Drag and drop the QoS mechanisms from the left onto their descriptions on the right
Answer:
Explanation:
NEW QUESTION # 208
Witch two actions provide controlled Layer 2 network connectivity between virtual machines running on the same hypervisor? (Choose two.)
- A. Use VXLAN fabric after installing VXLAN tunneling drivers on the virtual machines.
- B. Use a virtual switch provided by the hypervisor.
- C. Use a single routed link to an external router on stick.
- D. Use a virtual switch running as a separate virtual machine.
- E. Use a single trunk link to an external Layer2 switch.
Answer: B,D
Explanation:
Source 1: https://www.cisco.com/c/dam/en/us/products/collateral/switches/nexus-1000v-switch-vmware-vsphere/at_a_glance_c45-532467.pdf Source 2: https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/vm_fex/vmware/gui/config_guide/2-1/b_GUI_VMware_VM-FEX_UCSM_Configuration_Guide_2_1/b_GUI_VMware_VM-FEX_UCSM_Configuration_Guide_2_1_chapter_0110.pdf
NEW QUESTION # 209
......
The Cisco 350-401 (Implementing Cisco Enterprise Network Core Technologies) certification exam is a highly sought-after certification for IT professionals who want to demonstrate their expertise in implementing and managing enterprise level networks. The exam is designed to test the candidate's knowledge and skills related to Cisco enterprise network technologies, including network security, automation, virtualization, and infrastructure.
350-401 2023 Training With 745 QA's: https://dumpstorrent.dumpsking.com/350-401-testking-dumps.html
